THE CERAMIC BODIES FOR DIFFERENT APPLICATIONS MENTIONED BELOW IN THE TABLE ARE DEVELOPED, TESTED AND INTRODUCED INTO THE PRODUCTION BY SPECIALISTS OF THE COMPANY:

PRODUCTS 

SEMI-PORCELAIN

PFL-1,   PFL-2,   PFF-2,   PFF-4
PFL-1, PFL-2, PFF-2, PFF-4
  1. Ceramic material ECOBODY PFL-1, technical requirements TU U 14.2-32359731-001:2006 is a powder-like product, designed for the production of semi-porcelain wares by means of slip casting into gypsum moulds.The product has stable quality, rather high strength in dry state, excellent rheological properties (high fluidity with small content of deflocculating agents, low thixotropy, fast thickness formation and drying in gypsum mould).The material is ideal for fast firing both in gas and in electric kilns.                          
  2. Ceramic material ECOBODY PFL-2, technical requirements TU U 14.2-32359731-001:2006 is a powder-like product, designed for the production of semi-porcelain wares with improved aesthetic and operating qualities by means of slip casting into gypsum moulds.Product has stable quality, rather high strength in dry state, excellent rheological properties (high fluidity with small content of deflocculating agents, low thixotropy, fast thickness formation and drying in gypsum mould).The material is ideal for fast firing both in gas and in electric kilns.      

  3. Ceramic material ECOBODY PFF-2, technical requirements TU U 14.2-32359731-001:2006 is the brick-formed or roll-formed plastic vacuum-processed body, designed for the production of semi-porcelain wares by means of plastic forming into gypsum or metal moulds.The product has stable quality, rather high plasticity and high strength in dry state. Due to high strengthening characteristics of the material after drying it is possible to glaze semi-finished product by dry crock and apply single firing.The composition of the body has rather high whiteness in the fired condition. The material can be fired both in gas and in electric kilns.        

  4. Ceramic material ECOBODY PFF-4, technical requirements TU U 14.2-32359731-001:2006 is the brick-formed or roll-formed plastic vacuum-processed body, designed for the production of semi-porcelain acid-proof wares (Rashig's rings, acid-proof tubes and shaped pieces for them etc.) and for building and decorative ceramic (elements of the fronts, landscape goods etc.), by means of plastic forming.The product has stable quality, rather high plasticity properties, the material is ideal for fast firing both in gas and in electric kilns.Due to proper melting during the firing's process, material has high strength and density, acid resistance.      

MAJOLICA 

MKL-1, MKL-2, MKF-1, MKF-2
MKL-1, MKL-2, MKF-1, MKF-2
  1. Ceramic material ECOBODY MKL-1, technical requirements TU U 14.2-32359731-001:2006 is a powder-like product, designed for the production of light-firing earthenware by means of slip casting into gypsum moulds.The product has stable quality, rather high strength in dry state, excellent rheological properties (high fluidity with small content of deflocculating agents, low thixotropy, fast thickness formation and drying in gypsum mould).The material is ideal for fast firing both in gas and in electric kilns.       

  2. Ceramic material ECOBODY MKL-2, technical requirements TU U 14.2-32359731-001:2006 is a powder-like product, designed for the production of light-firing earthenware by means of slip casting into gypsum moulds.The product has stable quality, rather high strength in dry state, excellent rheological properties (high fluidity with small content of deflocculating agents, low thixotropy, fast thickness formation and drying in gypsum mould).The material is ideal for fast firing both in gas and in electric kilns.       

  3. Ceramic material ECOBODY MKF-1, technical requirements TU U 14.2-32359731-001:2006 is the brick-formed or roll-formed plastic vacuum-processed body, designed for the production of faience wares by means of plastic forming.The product has stable quality, rather high plasticity and high strength in dry state and good forming properties.The material can be fired both in gas and in electric kilns.      

  4. Ceramic material MKF-2, technical requirements TU U 14.2-32359731-001:2006 is the brick-formed or roll-formed plastic vacuum-processed body, designed for the production of light-firing earthenware by means both of hand forming and of machine forming into gypsum or metal moulds.The product has stable quality, rather high plasticity and high strength in dry state. Due to high strengthening characteristics of the material after drying it is possible to glaze semi-finished product by dry crock and apply single firing both in gas and in electric kilns.      

HARD PORCELAIN 

TFL-1, TFF-1
TFL-1, TFF-1
  1. Ceramic material ECOBODY TFL-1, technical requirements TU U 14.2-32359731-001:2006 is a powder-like product, designed for the production of porcelain artistic-domestic wares by means of slip casting into gypsum moulds.The product has stable quality, rather high whiteness of fired crock, necessary strength in dry state, excellent rheological properties (high fluidity with small content of deflocculating agents, low thixotropy, fast thickness formation and drying in gypsum mould).The material is ideal for fast firing.      
  2. Ceramic material ECOBODY TFF-1, technical requirements TU U 14.2-32359731-001:2006 is the brick-formed or roll-formed plastic vacuum-processed body, designed for the production of porcelain wares by means of slip casting and plastic forming. The product has stable quality, rather high whiteness after firing, good forming and molding properties, high strength in dry state.       

CHAMOTTE 

ChM-2P, ChM-3P, ChM-4P, ChM-6P, ChM-4f
ChM-2P, ChM-3P, ChM-4P, ChM-6P, ChM-4f
  1. Ceramic material ECOBODY ChM-2P, technical requirements TU U 14.2-32359731-001:2006 is a mix of chamotte powder with fine-milled fire-clays and fluxes. It is designed for the production of decorative-artistic wares with increased demand to strength and frost-resistance. It is ideal for landscape ceramics.The product has stable quality, rather high strength in dry state, good forming properties. It is less sensitive to the drying process.The material can be fired both in gas and in electric kilns.     

  2. Ceramic material ECOBODY ChM-3P, technical requirements TU U 14.2-32359731-001:2006 is a mix of chamotte powder with fine-milled fire-clays and kaolin. It is designed for the production of decorative-artistic wares both for interior and exterior application (facade and landscape ceramics).The product has stable quality, rather high strength in dry state, good forming properties. It is less sensitive to the drying process.The material can be fired both in gas and in electric kilns.        

  3. Ceramic material ECOBODY ChM-4P, technical requirements TU U 14.2-32359731-001:2006 is a mix of chamotte powder with fine-milled fire-clays, mineralizers and feldspar. It is designed for the production of decorative-artistic wares both for interior and exterior application (facade and landscape ceramics).The product has stable quality, rather high strength in dry state, good forming properties. It is less sensitive to the drying process.The material can be fired both in gas and in electric kilns.       

  4. Ceramic material ECOBODY ChM-6P, technical requirements TU U 14.2-32359731-001:2006 is a mix of fine-dispersed chamotte powder with fine-milled fire-clays and fluxes. It is designed for the production of light-firing wares of decorative-artistic purposes both for interior and exterior application (landscape ceramics, elements of the fronts and buildings).The product is supplied as a plastic vacuum-processed ceramic body shaped like bars (brick-formed).The product has stable quality, good forming properties. It is low-sensitive to the drying process.The material can be fired both in gas and in electric kilns.        

  5. Ceramic material ECOBODY ChM-4F, technical requirements TU U 14.2-32359731-001:2006 is a powdery product, produced on basis of fine-milled fire-clays, with high plasticity, high strength in dry state and stable quality.The product is most suitable for the production of the engobes, building and decorative mixtures, as well as a correcting additive to ceramic materials of various compositions to improve their physicochemical and technological properties.       

BUILDING CERAMICS 

KR-2
KR-2

Ceramic material ECOBODY KR-2, technical requirements TU U 14.2-32359731-001:2006 is a press-powder of definite granulometric content, designed for the production of vitrified tiles (technical porcelain) by means of semi-dry pressing.

Product has stable quality, rather high strength in dry state.

The material is ideal for fast firing.